» » Fisher Delta heatbed kit available

Fisher Delta heatbed kit available

posted in: News | 2

This has been a long time coming, but the heatbed upgrade kits for our Fisher Delta 3d printer kits are now ready and available for sale.

fisher-heatbed-assembled

Unleash your Fisher Delta 3D printer’s potential with this heatbed upgrade kit, allowing you to print in a far broader range of materials, including ABS, PETG, HIPS and many more.

heatbed-prints

The heatbed kit is designed to simply replace the standard print bed with no disassembly of the machine required, and retaining the auto compensation functionality of the original design. With 120W available, the print surface temperature may be raised to 110C, allowing printing with materials such as ABS with a nozzle temperature of 250C. For Fisher Beta owners, the upgrade is available without a power supply as the unit shipped with the Beta machines was already rated to supply 120W.

To make use of the new heatbed, minor changes are required to the machine’s configuration file. All of the details, including assembly and fitting instructions, are available here.

Feel free to get in touch, either via email or in the comments below, if you have any questions regarding this upgrade.

2 Responses

  1. Nick wren
    | Reply

    Could i use buildtac on the heated bead instead of tape?

    • eMAKER
      | Reply

      Buildtak will also work with the heatbed, and ABS has been reported to stick well to it.

Leave a Reply