€2.28
Select 19v for use in Fisher, the Huxley hot end, or as a part cooling fan for a Huxley 3D printer.
Select 12v for use in the Mendel hot end, Ormerod hot end or as a part cooling fan for a Mendel or Ormerod 3D printer.
This fan comes with approx 13cm wires which have been crimped.
If you are replacing an Ormerod hot end fan which was 20mm wide you will need slightly shorter screws to fit this fan – M3x30mm cap head screws.
| Voltage | 19v, 12v |
|---|
Only logged in customers who have purchased this product may leave a review.
One pair of Acrylic Fisher rods. Colour: Black Material thickness: 3mm
Black rubber, fibreglass reinforced, 1/4 ” (6.25mm) wide MXL drive belt. Works with MXL pulleys. Priced per metre.
Heater block for Fisher hot end. The Quick-set heater block is also used in RepRapPro Quick-set hot ends as used in Huxley Duo, Mendel 3 and the Dual Colour Upgrade kits and Ormerod 2 kits shipped from June 2015.
Cartridge heater, available for use at 19v (yellow leads) or 12v (red leads). Length: 15mm Diameter: 5mm Wire length: 160mm Please note: the 19v cartridge heaters are now supplied with yellow leads and replace the heaters with white leads, to … Read More
As used on the RepRapPro Ormerod 2 3D printer. This power supply features auto input voltage switching for AC 110v or 240v operation, and is extremely robust. It will happily power a 200x200mm (8″x8″) heated bed, as well as NEMA17 … Read More
NEMA 17 stepper motor, fits Fisher 3D printer. Also suitable for Ormerod and Mendel sized 3D printers and geared extruder drives. Frame size: 42mm Length: 34mm Shaft diameter: 5mm
Reviews
There are no reviews yet.